Krause And Becker Airless Paint Sprayer Parts Diagram
Introduction
Krause and Becker is a well-known brand in the airless paint sprayer industry. Their airless paint sprayers are widely used by homeowners, contractors, and painters for a variety of painting projects. If you are a proud owner of a Krause and Becker airless paint sprayer, it is important to know the different parts of the sprayer and their functions. This article will provide you with a Krause and Becker airless paint sprayer parts diagram and a brief description of each part.
Motor and Pump
The motor and pump are the heart of the Krause and Becker airless paint sprayer. The motor provides the power to the pump, which draws paint from the paint container and pushes it through the spray gun. The motor and pump are the most important parts of the sprayer, and they must be in good working condition for the sprayer to function properly.
Pressure Control Knob
The pressure control knob is located on the front of the sprayer and is used to adjust the pressure of the paint flow. Turning the knob clockwise increases the pressure, while turning it counterclockwise decreases the pressure. The pressure control knob is an important part of the sprayer, as it allows you to adjust the flow of paint according to the type of surface you are painting.
Spray Gun
The spray gun is the part of the sprayer that you hold in your hand and use to spray the paint onto the surface. The spray gun consists of a trigger, which controls the flow of paint, and a nozzle, which determines the pattern of the spray. The Krause and Becker airless paint sprayer comes with a reversible tip, which allows you to clear clogs quickly and easily.
Hose
The hose connects the pump to the spray gun and carries the paint from the pump to the spray gun. The Krause and Becker airless paint sprayer comes with a 25-foot hose, which is long enough to reach most areas of your home or work site.
Filter
The filter is located inside the pump and prevents dirt and debris from entering the pump and clogging the spray gun. The filter should be cleaned regularly to ensure that it is functioning properly. If the filter becomes clogged, it can cause the sprayer to malfunction.
Prime/Spray Valve
The prime/spray valve is located at the top of the pump and is used to switch between the prime and spray modes. In the prime mode, the pump draws paint from the container and fills the hose and spray gun. In the spray mode, the pump pressurizes the paint and sprays it through the spray gun.
Manifold Filter
The manifold filter is located inside the pump and is used to filter the paint before it enters the spray gun. The manifold filter should be cleaned regularly to ensure that it is functioning properly. If the manifold filter becomes clogged, it can cause the spray gun to malfunction.
Spray Tip Guard
The spray tip guard is located at the end of the spray gun and is used to protect the spray tip from damage. The spray tip guard should be removed and cleaned regularly to ensure that it is functioning properly. If the spray tip guard becomes clogged, it can cause the spray gun to malfunction.
Conclusion
Knowing the different parts of your Krause and Becker airless paint sprayer is essential for maintaining and repairing the sprayer. By understanding the functions of each part, you can troubleshoot problems and ensure that your sprayer is always in good working condition. Refer to the Krause and Becker airless paint sprayer parts diagram when you need to identify a part or replace a damaged part.