Campbell Hausfeld Airless Paint Sprayer Will Not Prime
Introduction
If you are looking for a reliable and efficient paint sprayer, the Campbell Hausfeld Airless Paint Sprayer is a great choice. However, just like any other device, it may not work as expected. One of the issues that you may encounter is the sprayer not priming. In this article, we will discuss the possible reasons why this happens and how to troubleshoot the problem.
What is priming?
Before we dive into the reasons why your Campbell Hausfeld Airless Paint Sprayer is not priming, let us first define what priming means. Priming is the process of preparing the sprayer for use by filling it with paint or other liquid. Priming ensures that the sprayer is working correctly and that there is no air in the system.
Reasons why your Campbell Hausfeld Airless Paint Sprayer is not priming
There are several reasons why your Campbell Hausfeld Airless Paint Sprayer is not priming. Let us discuss each one of them.
Clogged filters
Clogged filters are one of the most common reasons why your sprayer is not priming. If the filters are clogged, the paint cannot flow through the system, and the sprayer will not prime. To check if the filters are clogged, remove them from the sprayer and clean them thoroughly. If they are too dirty, you may need to replace them.
Worn out inlet valve
Another reason why your sprayer is not priming is a worn-out inlet valve. The inlet valve is responsible for allowing paint to flow into the pump. If it is worn out, it will not open, and the sprayer will not prime. To fix this issue, you will need to replace the inlet valve.
Air in the system
If there is air in the system, the sprayer will not prime. To remove the air, turn off the sprayer and disconnect the hose from the gun. Hold the gun over a container and turn on the sprayer. Let it run for a few seconds until the paint starts flowing through the gun. Reconnect the hose, and the sprayer should prime correctly.
Clogged spray tip
If the spray tip is clogged, the paint cannot flow through the system, and the sprayer will not prime. To check if the spray tip is clogged, remove it from the gun and clean it thoroughly. If it is too dirty, you may need to replace it.
Low pressure
If the pressure is too low, the sprayer will not prime. Check the pressure gauge and make sure that it is set correctly. If the pressure is too low, adjust it accordingly.
Worn out packing kit
The packing kit is responsible for creating the seal between the pump and the motor. If it is worn out, it will not create a proper seal, and the sprayer will not prime. To fix this issue, you will need to replace the packing kit.
Conclusion
If your Campbell Hausfeld Airless Paint Sprayer is not priming, it can be frustrating. However, by following the troubleshooting steps outlined in this article, you should be able to identify the issue and fix it. Remember to keep your sprayer clean and well-maintained to prevent future problems.
Related video of Campbell Hausfeld Airless Paint Sprayer Will Not Prime