Campbell Hausfeld Airless Paint Sprayer Won T Prime
Introduction
If you're planning to do some painting, investing in a good airless paint sprayer can save you a lot of time and effort. Campbell Hausfeld is a well-known brand that produces high-quality airless paint sprayers. However, you may encounter some issues with your Campbell Hausfeld airless paint sprayer, such as it not priming properly. This article will guide you on what to do when your Campbell Hausfeld airless paint sprayer won't prime.
Understanding the Problem
Before you can fix the problem, you need to understand why your Campbell Hausfeld airless paint sprayer won't prime. The most common cause is an airlock in the system. When air gets trapped in the paint hose, it prevents the paint from flowing properly.
Steps to Take
Here are some steps you can take to fix the problem:
Step 1: Check the Suction Tube
The suction tube is the part of the sprayer that draws paint from the container. Check to make sure it's not clogged or bent. If it is, straighten it or clean it out.
Step 2: Check the Inlet Valve
The inlet valve is responsible for allowing paint to flow into the pump. If it's clogged, it won't allow paint to flow properly. Clean it out or replace it if necessary.
Step 3: Check the Pressure Relief Valve
The pressure relief valve is responsible for regulating the pressure in the system. If it's not working properly, it can cause the sprayer to not prime. Check to make sure it's not clogged or damaged.
Step 4: Check the Spray Gun
The spray gun is where the paint comes out. Check to make sure it's not clogged or damaged. Clean it out or replace it if necessary.
Step 5: Check the Paint Hose
The paint hose is where the paint flows through. Check to make sure there are no kinks or clogs in the hose. If there are, straighten it out or clean it.
Step 6: Prime the System Manually
If none of the above steps work, you can try priming the system manually. To do this, you'll need to remove the spray tip and hold the trigger down until paint comes out of the gun. This will help remove any airlocks in the system.
Conclusion
By following these steps, you should be able to fix the problem of your Campbell Hausfeld airless paint sprayer not priming properly. Remember to always check the suction tube, inlet valve, pressure relief valve, spray gun, and paint hose for any clogs or damage. If all else fails, try priming the system manually. With a little bit of troubleshooting, you'll be back to painting in no time!
Related video of Campbell Hausfeld Airless Paint Sprayer Won't Prime