Diy Pine Wood Frame For Paint By Numbers 16x20 Inches
Introduction
If you love painting, then you must have heard about paint by numbers. It is a fun and easy way to create beautiful artwork without any prior skills. The only thing you need is a paint by numbers kit, and you are good to go. However, if you want to display your artwork, you need a frame. In this article, we will guide you on how to make a DIY pine wood frame for paint by numbers 16x20 inches.
Materials Required
Before we start making the frame, let's take a look at the materials required:
- 4 pieces of pine wood measuring 16 inches in length and 1 inch in width
- 4 pieces of pine wood measuring 20 inches in length and 1 inch in width
- Wood glue
- Saw
- Sandpaper
- Clamps
- Staple gun
- Hanging hardware
Step 1: Cut The Wood
Using a saw, cut the 4 pieces of pine wood according to the required length and width. Make sure that the cuts are straight and precise.
Step 2: Sand The Wood
After cutting the wood, use sandpaper to smooth out any rough edges. This will ensure that the frame looks neat and tidy.
Step 3: Glue The Wood
Apply wood glue to the ends of the 16-inch pieces and attach them to the 20-inch pieces to form a rectangular frame. Use clamps to hold the frame together while the glue dries.
Step 4: Staple The Corners
Once the glue is dry, remove the clamps and staple the corners of the frame to reinforce it. This will ensure that the frame is sturdy and can hold the weight of the artwork.
Step 5: Add Hanging Hardware
Finally, add hanging hardware to the back of the frame so that you can display your artwork on the wall. You can use a staple gun to attach the hardware securely.
Conclusion
Now that you know how to make a DIY pine wood frame for paint by numbers 16x20 inches, you can display your artwork with pride. Not only is it affordable, but it is also a fun and easy project to do. So, grab your materials and get started!