Krause And Becker Airless Paint Sprayer Wont Prime
When it comes to painting large surfaces, airless paint sprayers are the go-to tool for most professional and DIY painters. Krause and Becker is a well-known brand that produces high-quality airless paint sprayers. However, like any other tool, these sprayers can encounter problems. One common issue that users face is the sprayer not priming. If your Krause and Becker airless paint sprayer won't prime, don't worry, as there are several potential solutions to this problem.
What is Priming?
Before we dive into the reasons why your Krause and Becker airless paint sprayer won't prime, let's first understand what priming means. Priming is the process of filling the pump with paint or water to remove any air from the system. This is crucial as air can cause the sprayer to sputter and produce an uneven coat. Without priming, the sprayer won't be able to deliver the paint evenly onto the surface.
Reasons Why Your Krause And Becker Airless Paint Sprayer Won't Prime
There are several reasons why your Krause and Becker airless paint sprayer won't prime. Let's take a look at some of the most common ones:
Clogged Filters
The filters in your airless paint sprayer can become clogged with paint particles, causing the sprayer to lose its prime. To fix this, remove the filters and clean them thoroughly with warm water and soap. Once cleaned, reattach the filters and try priming your sprayer again.
Low Pressure
If the pressure of your airless paint sprayer is too low, it won't be able to prime. Check if the pressure on the control panel is set to the correct level. If it's not, adjust it accordingly and try priming again.
Worn Out Packing Kit
The packing kit in your airless paint sprayer can wear out over time, causing leaks and loss of prime. To fix this, replace the packing kit with a new one. You can purchase a replacement kit from your local hardware store.
Empty Paint Container
If your paint container is empty or the paint level is too low, the sprayer won't be able to prime. Check if there's enough paint in the container and refill it if necessary.
Air in the System
If there's air in the system, the sprayer won't be able to prime. To remove air from the system, turn on the sprayer and let it run for a few minutes. This will force the air out of the system and allow the sprayer to prime.
Conclusion
If your Krause and Becker airless paint sprayer won't prime, it can be frustrating, but it's not the end of the world. By following the solutions outlined above, you should be able to get your sprayer back up and running in no time. Remember to always follow the manufacturer's instructions and safety guidelines when using any tool, including an airless paint sprayer.